/* * scsi.h Copyright (C) 1992 Drew Eckhardt * generic SCSI package header file by * Drew Eckhardt * * * * Modified by Eric Youngdale eric@tantalus.nrl.navy.mil to * add scatter-gather, multiple outstanding request, and other * enhancements. */ #ifndef _SCSI_H #define _SCSI_H /* $Header: /usr/src/linux/kernel/blk_drv/scsi/RCS/scsi.h,v 1.3 1993/09/24 12:20:33 drew Exp $ For documentation on the OPCODES, MESSAGES, and SENSE values, please consult the SCSI standard. */ /* SCSI opcodes */ #define TEST_UNIT_READY 0x00 #define REZERO_UNIT 0x01 #define REQUEST_SENSE 0x03 #define FORMAT_UNIT 0x04 #define READ_BLOCK_LIMITS 0x05 #define REASSIGN_BLOCKS 0x07 #define READ_6 0x08 #define WRITE_6 0x0a #define SEEK_6 0x0b #define READ_REVERSE 0x0f #define WRITE_FILEMARKS 0x10 #define SPACE 0x11 #define INQUIRY 0x12 #define RECOVER_BUFFERED_DATA 0x14 #define MODE_SELECT 0x15 #define RESERVE 0x16 #define RELEASE 0x17 #define COPY 0x18 #define ERASE 0x19 #define MODE_SENSE 0x1a #define START_STOP 0x1b #define RECEIVE_DIAGNOSTIC 0x1c #define SEND_DIAGNOSTIC 0x1d #define ALLOW_MEDIUM_REMOVAL 0x1e #define SET_WINDOW 0x24 #define READ_CAPACITY 0x25 #define READ_10 0x28 #define WRITE_10 0x2a #define SEEK_10 0x2b #define WRITE_VERIFY 0x2e #define VERIFY 0x2f #define SEARCH_HIGH 0x30 #define SEARCH_EQUAL 0x31 #define SEARCH_LOW 0x32 #define SET_LIMITS 0x33 #define PRE_FETCH 0x34 #define READ_POSITION 0x34 #define SYNCHRONIZE_CACHE 0x35 #define LOCK_UNLOCK_CACHE 0x36 #define READ_DEFECT_DATA 0x37 #define MEDIUM_SCAN 0x38 #define COMPARE 0x39 #define COPY_VERIFY 0x3a #define WRITE_BUFFER 0x3b #define READ_BUFFER 0x3c #define UPDATE_BLOCK 0x3d #define READ_LONG 0x3e #define WRITE_LONG 0x3f #define CHANGE_DEFINITION 0x40 #define WRITE_SAME 0x41 #define LOG_SELECT 0x4c #define LOG_SENSE 0x4d #define MODE_SELECT_10 0x55 #define MODE_SENSE_10 0x5a #define WRITE_12 0xaa #define WRITE_VERIFY_12 0xae #define SEARCH_HIGH_12 0xb0 #define SEARCH_EQUAL_12 0xb1 #define SEARCH_LOW_12 0xb2 #define SEND_VOLUME_TAG 0xb6 extern void scsi_make_blocked_list(void); extern volatile int in_scan_scsis; extern const unsigned char scsi_command_size[8]; #define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7] /* MESSAGE CODES */ #define COMMAND_COMPLETE 0x00 #define EXTENDED_MESSAGE 0x01 #define EXTENDED_MODIFY_DATA_POINTER 0x00 #define EXTENDED_SDTR 0x01 #define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */ #define EXTENDED_WDTR 0x03 #define SAVE_POINTERS 0x02 #define RESTORE_POINTERS 0x03 #define DISCONNECT 0x04 #define INITIATOR_ERROR 0x05 #define ABORT 0x06 #define MESSAGE_REJECT 0x07 #define NOP 0x08 #define MSG_PARITY_ERROR 0x09 #define LINKED_CMD_COMPLETE 0x0a #define LINKED_FLG_CMD_COMPLETE 0x0b #define BUS_DEVICE_RESET 0x0c #define INITIATE_RECOVERY 0x0f /* SCSI-II only */ #define RELEASE_RECOVERY 0x10 /* SCSI-II only */ #define SIMPLE_QUEUE_TAG 0x20 #define HEAD_OF_QUEUE_TAG 0x21 #define ORDERED_QUEUE_TAG 0x22 #define IDENTIFY_BASE 0x80 #define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\ ((can_disconnect) ? 0x40 : 0) |\ ((lun) & 0x07)) /* Status codes */ #define GOOD 0x00 #define CHECK_CONDITION 0x01 #define CONDITION_GOOD 0x02 #define BUSY 0x04 #define INTERMEDIATE_GOOD 0x08 #define INTERMEDIATE_C_GOOD 0x0a #define RESERVATION_CONFLICT 0x0c #define QUEUE_FULL 0x1a #define STATUS_MASK 0x1e /* the return of the status word will be in the following format : The low byte is the status returned by the SCSI command, with vendor specific bits masked. The next byte is the message which followed the SCSI status. This allows a stos to be used, since the Intel is a little endian machine. The final byte is a host return code, which is one of the following. IE lsb msb status msg host code Our errors returned by OUR driver, NOT SCSI message. Or'd with SCSI message passed back to driver . */ /* NO error */ #define DID_OK 0x00 /* Couldn't connect before timeout period */ #define DID_NO_CONNECT 0x01 /* BUS stayed busy through time out period */ #define DID_BUS_BUSY 0x02 /* TIMED OUT for other reason */ #define DID_TIME_OUT 0x03 /* BAD target. */ #define DID_BAD_TARGET 0x04 /* Told to abort for some other reason */ #define DID_ABORT 0x05 /* Parity error */ #define DID_PARITY 0x06 /* Internal error */ #define DID_ERROR 0x07 /* Reset by somebody. */ #define DID_RESET 0x08 /* Got an interrupt we weren't expecting. */ #define DID_BAD_INTR 0x09 /* Driver status */ #define DRIVER_OK 0x00 /* These indicate the error that occurred, and what is available. */ #define DRIVER_BUSY 0x01 #define DRIVER_SOFT 0x02 #define DRIVER_MEDIA 0x03 #define DRIVER_ERROR 0x04 #define DRIVER_INVALID 0x05 #define DRIVER_TIMEOUT 0x06 #define DRIVER_HARD 0x07 #define SUGGEST_RETRY 0x10 #define SUGGEST_ABORT 0x20 #define SUGGEST_REMAP 0x30 #define SUGGEST_DIE 0x40 #define SUGGEST_SENSE 0x80 #define SUGGEST_IS_OK 0xff #define DRIVER_SENSE 0x08 #define DRIVER_MASK 0x0f #define SUGGEST_MASK 0xf0 /* SENSE KEYS */ #define NO_SENSE 0x00 #define RECOVERED_ERROR 0x01 #define NOT_READY 0x02 #define MEDIUM_ERROR 0x03 #define HARDWARE_ERROR 0x04 #define ILLEGAL_REQUEST 0x05 #define UNIT_ATTENTION 0x06 #define DATA_PROTECT 0x07 #define BLANK_CHECK 0x08 #define COPY_ABORTED 0x0a #define ABORTED_COMMAND 0x0b #define VOLUME_OVERFLOW 0x0d #define MISCOMPARE 0x0e /* DEVICE TYPES */ #define TYPE_DISK 0x00 #define TYPE_TAPE 0x01 #define TYPE_PROCESSOR 0x03 /* HP scanners use this */ #define TYPE_WORM 0x04 /* Treated as ROM by our system */ #define TYPE_ROM 0x05 #define TYPE_SCANNER 0x06 #define TYPE_MOD 0x07 /* Magneto-optical disk - treated as TYPE_DISK */ #define TYPE_NO_LUN 0x7f #define MAX_COMMAND_SIZE 12 /* SCSI command sets */ #define SCSI_UNKNOWN 0 #define SCSI_1 1 #define SCSI_1_CCS 2 #define SCSI_2 3 /* Every SCSI command starts with a one byte OP-code. The next byte's high three bits are the LUN of the device. Any multi-byte quantities are stored high byte first, and may have a 5 bit MSB in the same byte as the LUN. */ /* Manufacturers list */ #define SCSI_MAN_UNKNOWN 0 #define SCSI_MAN_NEC 1 #define SCSI_MAN_TOSHIBA 2 #define SCSI_MAN_NEC_OLDCDR 3 /* The scsi_device struct contains what we know about each given scsi device. */ typedef struct scsi_device { struct scsi_device * next; /* Used for linked list */ unsigned char id, lun; unsigned int manufacturer; /* Manufacturer of device, for using vendor-specific cmd's */ int attached; /* # of high level drivers attached to this */ int access_count; /* Count of open channels/mounts */ struct wait_queue * device_wait; /* Used to wait if device is busy */ struct Scsi_Host * host; void (*scsi_request_fn)(void); /* Used to jumpstart things after an ioctl */ void *hostdata; /* available to low-level driver */ char type; char scsi_level; unsigned writeable:1; unsigned removable:1; unsigned random:1; unsigned changed:1; /* Data invalid due to media change */ unsigned busy:1; /* Used to prevent races */ unsigned lockable:1; /* Able to prevent media removal */ unsigned borken:1; /* Tell the Seagate driver to be painfully slow on this device */ unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */ unsigned tagged_queue:1; /*SCSI-II tagged queuing enabled */ unsigned disconnect:1; /* can disconnect */ unsigned soft_reset:1; /* Uses soft reset option */ unsigned char current_tag; /* current tag */ unsigned sync:1; /* Negotiate for sync transfers */ unsigned char sync_min_period; /* Not less than this period */ unsigned char sync_max_offset; /* Not greater than this offset */ } Scsi_Device; /* Use these to separate status msg and our bytes */ #define status_byte(result) (((result) >> 1) & 0xf) #define msg_byte(result) (((result) >> 8) & 0xff) #define host_byte(result) (((result) >> 16) & 0xff) #define driver_byte(result) (((result) >> 24) & 0xff) #define suggestion(result) (driver_byte(result) & SUGGEST_MASK) #define sense_class(sense) (((sense) >> 4) & 0x7) #define sense_error(sense) ((sense) & 0xf) #define sense_valid(sense) ((sense) & 0x80); /* These are the SCSI devices available on the system. */ extern Scsi_Device * scsi_devices; /* Initializes all SCSI devices. This scans all scsi busses. */ extern unsigned long scsi_dev_init (unsigned long, unsigned long); struct scatterlist { char * address; /* Location data is to be transferred to */ char * alt_address; /* Location of actual if address is a dma indirect buffer. NULL otherwise */ unsigned int length; }; #define ISA_DMA_THRESHOLD (0x00ffffff) #define CONTIGUOUS_BUFFERS(X,Y) ((X->b_data+X->b_size) == Y->b_data) /* * These are the return codes for the abort and reset functions. The mid-level * code uses these to decide what to do next. Each of the low level abort * and reset functions must correctly indicate what it has done. */ /* We did not do anything. Wait some more for this command to complete, and if this does not work, try something more serious. */ #define SCSI_ABORT_SNOOZE 0 /* This means that we were able to abort the command. We have already called the mid-level done function, and do not expect an interrupt that will lead to another call to the mid-level done function for this command */ #define SCSI_ABORT_SUCCESS 1 /* We called for an abort of this command, and we should get an interrupt when this succeeds. Thus we should not restore the timer for this command in the mid-level abort function. */ #define SCSI_ABORT_PENDING 2 /* Unable to abort - command is currently on the bus. Grin and bear it. */ #define SCSI_ABORT_BUSY 3 /* The command is not active in the low level code. Command probably finished. */ #define SCSI_ABORT_NOT_RUNNING 4 /* Something went wrong. The low level driver will indicate the correct error condition when it calls scsi_done, so the mid-level abort function can simply wait until this comes through */ #define SCSI_ABORT_ERROR 5 /* We do not know how to reset the bus, or we do not want to. Bummer. Anyway, just wait a little more for the command in question, and hope that it eventually finishes. If it never finishes, the SCSI device could hang, so use this with caution. */ #define SCSI_RESET_SNOOZE 0 /* We do not know how to reset the bus, or we do not want to. Bummer. We have given up on this ever completing. The mid-level code will request sense information to decide how to proceed from here. */ #define SCSI_RESET_PUNT 1 /* This means that we were able to reset the bus. We have restarted all of the commands that should be restarted, and we should be able to continue on normally from here. We do not expect any interrupts that will return DID_RESET to any of the other commands in the host_queue, and the mid-level code does not need to do anything special to keep the commands alive. */ #define SCSI_RESET_SUCCESS 2 /* We called for a reset of this bus, and we should get an interrupt when this succeeds. Each command should get its own status passed up to scsi_done, but this has not happened yet. */ #define SCSI_RESET_PENDING 3 /* We did a reset, but do not expect an interrupt to signal DID_RESET. This tells the upper level code to request the sense info, and this should keep the command alive. */ #define SCSI_RESET_WAKEUP 4 /* Something went wrong, and we do not know how to fix it. */ #define SCSI_RESET_ERROR 5 void * scsi_malloc(unsigned int); int scsi_free(void *, unsigned int); extern unsigned int dma_free_sectors; /* How much room do we have left */ extern unsigned int need_isa_buffer; /* True if some devices need indirection buffers */ /* The Scsi_Cmnd structure is used by scsi.c internally, and for communication with low level drivers that support multiple outstanding commands. */ typedef struct scsi_pointer { char * ptr; /* data pointer */ int this_residual; /* left in this buffer */ struct scatterlist *buffer; /* which buffer */ int buffers_residual; /* how many buffers left */ volatile int Status; volatile int Message; volatile int have_data_in; volatile int sent_command; volatile int phase; } Scsi_Pointer; typedef struct scsi_cmnd { struct Scsi_Host * host; Scsi_Device * device; unsigned char target, lun; unsigned char cmd_len; unsigned char old_cmd_len; struct scsi_cmnd *next, *prev; /* These elements define the operation we are about to perform */ unsigned char cmnd[12]; unsigned request_bufflen; /* Actual request size */ void * request_buffer; /* Actual requested buffer */ /* These elements define the operation we ultimately want to perform */ unsigned char data_cmnd[12]; unsigned short old_use_sg; /* We save use_sg here when requesting sense info */ unsigned short use_sg; /* Number of pieces of scatter-gather */ unsigned short sglist_len; /* size of malloc'd scatter-gather list */ unsigned short abort_reason; /* If the mid-level code requests an abort, this is the reason. */ unsigned bufflen; /* Size of data buffer */ void *buffer; /* Data buffer */ unsigned underflow; /* Return error if less than this amount is transfered */ unsigned transfersize; /* How much we are guaranteed to transfer with each SCSI transfer (ie, between disconnect / reconnects. Probably == sector size */ struct request request; /* A copy of the command we are working on*/ unsigned char sense_buffer[16]; /* Sense for this command, if needed*/ int retries; int allowed; int timeout_per_command, timeout_total, timeout; /* * We handle the timeout differently if it happens when a reset, * abort, etc are in process. */ unsigned volatile char internal_timeout; unsigned flags; /* These variables are for the cdrom only. Once we have variable size buffers in the buffer cache, they will go away. */ int this_count; /* End of special cdrom variables */ /* Low-level done function - can be used by low-level driver to point to completion function. Not used by mid/upper level code. */ void (*scsi_done)(struct scsi_cmnd *); void (*done)(struct scsi_cmnd *); /* Mid-level done function */ /* The following fields can be written to by the host specific code. Everything else should be left alone. */ Scsi_Pointer SCp; /* Scratchpad used by some host adapters */ unsigned char * host_scribble; /* The host adapter is allowed to call scsi_malloc and get some memory and hang it here. The host adapter is also expected to call scsi_free to release this memory. (The memory obtained by scsi_malloc is guaranteed to be at an address < 16Mb). */ int result; /* Status code from lower level driver */ unsigned char tag; /* SCSI-II queued command tag */ unsigned long pid; /* Process ID, starts at 0 */ } Scsi_Cmnd; /* scsi_abort aborts the current command that is executing on host host. The error code, if non zero is returned in the host byte, otherwise DID_ABORT is returned in the hostbyte. */ extern int scsi_abort (Scsi_Cmnd *, int code, int pid); extern void scsi_do_cmd (Scsi_Cmnd *, const void *cmnd , void *buffer, unsigned bufflen, void (*done)(struct scsi_cmnd *), int timeout, int retries); extern Scsi_Cmnd * allocate_device(struct request **, Scsi_Device *, int); extern Scsi_Cmnd * request_queueable(struct request *, Scsi_Device *); extern int scsi_reset (Scsi_Cmnd *); extern int max_scsi_hosts; #if defined(MAJOR_NR) && (MAJOR_NR != SCSI_TAPE_MAJOR) #include "hosts.h" static Scsi_Cmnd * end_scsi_request(Scsi_Cmnd * SCpnt, int uptodate, int sectors) { struct request * req; struct buffer_head * bh; req = &SCpnt->request; req->errors = 0; if (!uptodate) { printk(DEVICE_NAME " I/O error: dev %04x, sector %lu\n", req->dev,req->sector); } do { if ((bh = req->bh) != NULL) { req->bh = bh->b_reqnext; req->nr_sectors -= bh->b_size >> 9; req->sector += bh->b_size >> 9; bh->b_reqnext = NULL; bh->b_uptodate = uptodate; unlock_buffer(bh); sectors -= bh->b_size >> 9; if ((bh = req->bh) != NULL) { req->current_nr_sectors = bh->b_size >> 9; if (req->nr_sectors < req->current_nr_sectors) { req->nr_sectors = req->current_nr_sectors; printk("end_scsi_request: buffer-list destroyed\n"); } } } } while(sectors && bh); if (req->bh){ req->buffer = bh->b_data; return SCpnt; }; DEVICE_OFF(req->dev); if (req->sem != NULL) { up(req->sem); } if (SCpnt->host->block) { struct Scsi_Host * next; for (next = SCpnt->host->block; next != SCpnt->host; next = next->block) wake_up(&next->host_wait); } req->dev = -1; wake_up(&wait_for_request); wake_up(&SCpnt->device->device_wait); return NULL; } /* This is just like INIT_REQUEST, but we need to be aware of the fact that an interrupt may start another request, so we run this with interrupts turned off */ #define INIT_SCSI_REQUEST \ if (!CURRENT) {\ CLEAR_INTR; \ restore_flags(flags); \ return; \ } \ if (MAJOR(CURRENT->dev) != MAJOR_NR) \ panic(DEVICE_NAME ": request list destroyed"); \ if (CURRENT->bh) { \ if (!CURRENT->bh->b_lock) \ panic(DEVICE_NAME ": block not locked"); \ } #endif #define SCSI_SLEEP(QUEUE, CONDITION) { \ if (CONDITION) { \ struct wait_queue wait = { current, NULL}; \ add_wait_queue(QUEUE, &wait); \ for(;;) { \ current->state = TASK_UNINTERRUPTIBLE; \ if (CONDITION) { \ if (intr_count) \ panic("scsi: trying to call schedule() in interrupt" \ ", file %s, line %d.\n", __FILE__, __LINE__); \ schedule(); \ } \ else \ break; \ } \ remove_wait_queue(QUEUE, &wait); \ current->state = TASK_RUNNING; \ }; } #endif /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically * adjust the settings for this buffer only. This must remain at the end * of the file. * --------------------------------------------------------------------------- * Local variables: * c-indent-level: 8 * c-brace-imaginary-offset: 0 * c-brace-offset: -8 * c-argdecl-indent: 8 * c-label-offset: -8 * c-continued-statement-offset: 8 * c-continued-brace-offset: 0 * End: */