# This is a sample mailcap file based on the sample mailcap file
# contained in the metamail distribution (version 2.7) from Bellcore.
# This sample is for a Unix system.  Look at the original sample from
# the metamail distribution for more ideas.  This is a simplified version
# to explain how it works with Pine.  As of October, 1994, metamail was
# available via anonymous ftp from the host thumper.bellcore.com in the
# file /pub/nsb/mm2.7.tar.Z.
#
# Metamail is:
# Copyright (c) 1991 Bell Communications Research, Inc. (Bellcore)
# 
# Permission to use, copy, modify, and distribute this material 
# for any purpose and without fee is hereby granted, provided 
# that the above copyright notice and this permission notice 
# appear in all copies, and that the name of Bellcore not be 
# used in advertising or publicity pertaining to this 
# material without the specific, prior written permission 
# of an authorized representative of Bellcore.  BELLCORE 
# MAKES NO REPRESENTATIONS ABOUT THE ACCURACY OR SUITABILITY 
# OF THIS MATERIAL FOR ANY PURPOSE.  IT IS PROVIDED "AS IS", 
# WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES.
#
# The mailcap viewers are used by Pine when viewing pieces of a message
# from within the attachment viewer.  That is, you type the "V" command
# when already viewing a message.
#
# Pine expects the mailcap file to be in /etc/mailcap on Unix systems.
# Users may override or extend this with a .mailcap file in their home
# directory.  The contents of that will be combined with /etc/mailcap.
# Users may override this standard Pine mailcap path
# ("~/.mailcap:/etc/mailcap") by defining the environment variable
# MAILCAPS to be equal to the colon separated path.
#
# On PC's (DOS or Windows) the file MAILCAP is searched for first in the
# same directory where the user's PINERC is located and then in the same
# directory where PINE.EXE is located.  The first would be the user's personal
# override file and the second the common file used by all users.   Users
# may override this location by defining the environment variable MAILCAPS
# to be equal to the *semicolon* separated path.
#
# Pine does not use the "compose=" portion of mailcap entries (and doesn't
# provide a general method of composing different types of messages).
# Pine doesn't pay attention to "copiousoutput", but always pipes the output
# to its standard scrolling text window if "needsterminal" is not set.
# If "needsterminal" is set, then Pine sets the terminal or terminal window
# back to the state it was in when Pine was started and lets the viewer run.
# When the viewer finishes, Pine resets the terminal and redraws the screen.
# If any user interaction with the viewer is required and the viewer runs
# in the same terminal window as Pine, then "needsterminal" should be set.
# The "test=" commands are used as defined in RFC1524, except that the
# data file is not available to the test command.
#
# Since mailcap is only used from the attachment viewer, the message being
# viewed will always be a single part, so "multipart" entries in mailcap have
# no effect on Pine.  Type "text/plain" with "charset=usascii" or charset
# matching the character-set variable are intercepted and displayed by Pine
# in the normal way, not displayed by a mailcap viewer.  Besides those
# exceptions just listed, all other types and subtypes are subject to
# being displayed by a mailcap viewer.  If no match is found for types text
# or message, Pine will display them in its usual way.
#
# As a special case, the "image-viewer" variable from the pinerc file is
# supported as if an extra entry for type image/* came first in the
# personal mailcap file.  That's for backwards compatibility.
#
#
# The following line causes the xv program to be used to display all
# image types if the DISPLAY variable is set (indicating the user is
# using X).  (xv is written by John Bradley, bradley@cis.upenn.edu.  There
# are also other X image viewer programs you could use, such as xloadimage.)
image/*; xv %s; test=test -n "$DISPLAY"

# The effect of the following is to send ALL audio subtypes to the 
# showaudio program.  If possible, it would be desirable to also include
# a test command that could decide whether or not the user could play audio.
# That would be something like "test=can_do_audio %t".  (Showaudio is a shell
# script included in the metamail distribution.)
audio/*; showaudio %s

# (Showexternal is a shell script included in the metamail distribution.)
message/external-body; showexternal %s %{access-type} %{name} \
	%{site} %{directory} %{mode} %{server}; \
	needsterminal; composetyped = extcompose %s; \
	description="A reference to data stored in an external location"

# If you have an interactive Postscript interpreter, you should think carefully 
# before replacing lpr with it in the following line, because PostScript
# can be an enormous security hole.  It is RELATIVELY harmless
# when sent to the printer...
application/postscript ; lpr %s \; echo SENT FILE TO PRINTER ;\
    description="A Postscript File";
# unsafe alternative
#application/postscript; gspreview %s ;  test=test -n "$DISPLAY"

# The following gives rudimentary capability for receiving 
# text mail in the ISO-8859-1 character set, which covers many European 
# languages, and the ISO-8859-8 character set, which includes Hebrew
# Note that the pipe to tr ensures that the "ISO" is case-insensitive.
# (This is also from metamail.)
text/plain; shownonascii iso-8859-8 %s; test=test "`echo %{charset} | tr '[A-Z]' '[a-z]'`" = iso-8859-8; copiousoutput
text/plain; shownonascii iso-8859-1 %s; test=test "`echo %{charset} | tr '[A-Z]' '[a-z]'`" = iso-8859-1; copiousoutput

# The following displays Japanese text at sites where
# the "kterm" program is installed:
text/plain; kterm -geometry +0+0 -e more %s /dev/null; \
	test=test "`echo %{charset} | tr '[A-Z]' '[a-z]'`" = iso-2022-jp

# This maps MPEG video data to the viewer 'mpeg_play'.
# (Mpeg_play is part of the MPEG distribution from The Berkeley Plateau
# Research Group and is available via anonymous ftp from toe.cs.berkeley.edu.)
video/mpeg; mpeg_play %s ; test=test -n "$DISPLAY"

# This maps all other types of video to the xanim viewer.  (Xanim is written
# by Mark Podlipec, podlipec@wellfleet.com.)
video/*; xanim %s ; test=test -n "$DISPLAY"

# The xdvi program display TeX dvi files on an X server.
application/x-dvi; xdvi %s ;  test=test -n "$DISPLAY"

# Type octet-stream (binary) data can be displayed as a hex dump before
# you decide whether or not you want to save it to a file.  (Hd is just
# a standard hex dump program.  You could use "od" if you don't have an
# "hd".  Naive users may find the output from this entry confusing.)
application/octet-stream; hd; copiousoutput; description="Hex dump of data"