################################################################### # File...: /etc/X11/xorg.conf-riscpc # Purpose: Xorg config file for an Acorn StrongARM RiscPC # Author : ARMedslack Project # Date...: 22-Nov-2004 #################################################################### # Installation notes #################### # [1] You will need to adjust your monitor settings in the section # marked: Section "Monitor" # [2] If you only have 1MB VRAM then you'll need to adjust the # VideoRam directive accordingly. #################################################################### Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/share/fonts/extra/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "dbe" # Load "dri" Load "extmod" Load "glx" Load "record" Load "xtrap" # Load "speedo" Load "type1" EndSection # Keyboard: Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "riscpc" Option "XkbLayout" "gb" EndSection # Mouse: Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" # Option "Protocol" "IMPS/2" Option "Emulate3Buttons" "no" # For Linux 2.4: # Device "/dev/sunmouse" # Protocol "BusMouse" EndSection # Make X check our modes first rather than deciding for itself: Section "Modes" Identifier "Forced Monitor Modes" # 800x600 @ 56Hz (VESA) hsync: 35.2kHz ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # Modeline "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync # ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync EndSection # Monitor - Dell TFT: Section "Monitor" UseModes "Forced Monitor Modes" Identifier "Monitor0" VendorName "Dell" ModelName "Dell 1701FP (Analog)" # DisplaySize 340 270 HorizSync 30.0 - 80.0 VertRefresh 56.0 - 76.0 #Option "dpms" EndSection # Graphics card: Section "Device" Identifier "Card0" Driver "fbdev" Option "UseFBDev" "true" # Uncomment this line if you only have 1MB of VRAM: # VideoRam 1024 # # Linux assumes 2MB by default so the next line is redundant # but remains commented for reference: VideoRam 2048 EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 15 SubSection "Display" Depth 1 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 # Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection